Pulse Oximeter and Heart-Rate Sensor
Pulse Oximeter and Heart-Rate Sensor MAX30100 chip with a PH2.0 x 4 interface to make it compatible with the Grove Socket
* With unified packaging, stamp hole packaging (LGA) that can be directly soldered onto the circuit.
* Compatible with Grove socket through the PH2.0 x 4 interface.
* Strong structure and high sensitivity
Product introduction
What’s this?
The Pulse Oximeter and Heart-Rate Sensor, utilizing the MAX30100 chip, is part of the Heltec Quick Link Series. The module features stamp hole packaging (LGA) for direct circuit soldering or compatibility with the Grove socket via the PH2.0 x 4 interface.
Main Features
The Heltec QuickLink Series element offers a diverse range of sensors and actuators. With a standardized packaging size and interface, the stamp hole allows for direct soldering onto your board like most modules, and it can also be optionally equipped with a PH2.0 x 4 interface to ensure compatibility with the Grove Socket. The MAX30100 is a comprehensive sensor solution for integrated pulse oximetry and heart rate monitoring, incorporating two LEDs, a photodetector, optimized optics, and low-noise analog signal processing to accurately detect pulse oximetry and heart-rate signals.
Specification
- Tab1
|
Parameters
|
Description
|
|
Power-Supply Voltage
|
3.3V
|
|
Low Shutdown Current
|
0.7μA
|
|
Supply Current
|
600μA
|
|
Dimension
|
15mm*15mm*10mm(including Quick Link Socket)
|
|
15mm*15mm*2mm(excluding Quick Link Socket)
|
|
|
Interfaces
|
I2C on PH2.0 x 4
|
|
I2C and SPI on LGA (2.54 stamp home)
|
|
|
Operating Temperature Range
|
-40~85℃
|
|
Storage Temperature Range
|
-40~105℃
|
Picture display
Main Catagory
Contact us to meet your needs.
Send Your Inquiry Today