• NM-RF-HAT
  • NM-RF-HAT
  • NM-RF-HAT
  • NM-RF-HAT
  • NM-RF-HAT
  • NM-RF-HAT
  • NM-RF-HAT
  • NM-RF-HAT
  • NM-RF-HAT
  • NM-RF-HAT
  • NM-RF-HAT
  • NM-RF-HAT

NM-RF-HAT

Plug-and-Play NM-RF-Hat RF Expansion Board with Hardware Switch for ESP32-2432S028

 

♦2.8 Inch Display:240*320 Smart display Screen
♦Model Number:ESP32-2432S028R
♦Easy Setup:phone or Official flash tool
♦HashRate:1000 KH/s
♦Wi-Fi:802.11 b/g/n, up to 150Mbps
♦Power supply range:5V TypeC

Product introduction

What’s this?
♦NM-RF-HAT: RF modules all-in-one, Compatibility:Seamlessly integrates with ESP32-2432S028, support CC1101, nRF24, PN532, IR and 433M OOK for versatile RF projects
♦With hardware switch which allows you to seamless toggle between RF modules;
♦Plug-and-Play Stability: No more firmware hacks or complex pin remapping. Simply flip the switch to ensure stable, reliable across all integrated components.
Main Features
1. Hardware-Level Conflict Resolution: The RF Switch Breakthrough:
• The Problem Solved: The notorious SPI bus conflict when integrating multiple modules (CC1101, SD Card, Display) is over. We’ve implemented a Hardware RF Switch that allows you to seamlessly toggle between RF modules.
• Plug-and-Play Stability: No more firmware hacks or complex pin remapping. Simply flip the switch to ensure stable, reliable operation across all integrated components.
• Minimal Wiring: Designed for simple connection to the ESP32-2432S028 (CYD) via a few dedicated lines ( 2x4Pin Cable, 1x5Pin Cable, 1xTF male Extension Cable), turning a complex DIY project into a clean, modular assembly.

2. Maximum Integration: All-in-One RF & Utility: This single PCB integrates every critical module the Bruce community demands, making it the most feature-complete companion board available:
Module
Frequency/Type
Function
Sub-GHz
CC1101 (433MHz)
Remote Control, Sensor Capture
2.4GHz
nRF24
Wireless Protocol Analysis
NFC/RFID
PN532
Read, Write, Emulation
IR Control
IR TX/RX
Infrared Signal Capture/Replay
RF433
OOK TX/RX
Basic RF Transmission
Power Mgmt
USB-C, BAT Circuit
Charging, On/Off Switch
Expansion
GNSS Header
GPS/Location Tracking
If you have CYD (ESP32-2432S028) already, only need to flash Bruce-CYD-2USB firmware.
3.NM-RF-HAT GPS Module | Plug & Play:
This NM-RF-HAT new version GPS module features a true plug-and-play design with no drivers or complicated setup required.
It delivers fast satellite acquisition, high sensitivity, and stable positioning even in weak signal environments. Compact and widely compatible with development boards, IoT devices, robotics, and vehicle tracking applications, this module offers strong anti-interference performance and low power consumption for reliable long-term use.
• Upgraded NM‑RF‑HAT GPS module with enhanced performance, faster satellite acquisition and stronger signal stability. • True plug‑and‑play design, driver‑free, no complicated wiring or configuration required, easy to use for all users.
• High sensitivity module ensures reliable positioning even in weak signal environments, with strong anti-interference ability.
• Compact size and wide compatibility, perfectly suitable for Raspberry Pi, development boards, IoT projects and smart devices.
Low power consumption and durable structure, ideal for long-term working in vehicle tracking, outdoor positioning and robotics applications.

Specification

Title
Info
Origin
Mainland China
Integrated Feature
WiFi 802.11b/g/n, BLE
Master Chip
ESP32-DROOM
Power monitoring range
5~20V/0~6A
HashRate
1000KH/s
Wi-Fi
802.11 b/g/n
Power supply range
5V
Display
2.8 inch 240*320 Smart Display
Charge protocols
Memory
Build-in 520KB SRAM
Dimensions
86 * 50 * 13.5mm
Device management
NMController
Operating temperature
-20 ~ 70 ℃

Picture display

Main Catagory

HT-M7603 Gateway
WiFi LoRa 32(V3)
WiFi LoRa 32 Development Board
CO Gas Sensor
CO Gas Sensor
HRI-36315
Wireless Aggregator
2.6-inch ink screen
1.54-inch ink screen
Electronic ink screen series
Contact us to meet your needs.
Send Your Inquiry Today
Quick Quote
Scroll to Top