HT-CT62
Heltec HT-CT62 ESP32C3 Sx1262LoRaWAN module 433mhz 868mhz 915MHz ultra-long-range spread spectrum communication with low power
* Microprocessor: ESP32-C3FN4 (RISC-V architecture 32-bit, main frequency up to 160 MHz)
* Integrated WiFi network connection, onboard Wi-Fi, IPEX socket.
* Support the Arduino development environment;
* LoRaWAN 1.0.2support;
* Ultra low power design, 10uA in deep sleep;
* 1.27 stamp edge design for SMT;
* Good impendence matching and long communication
* Integrated WiFi network connection, onboard Wi-Fi, IPEX socket.
* Support the Arduino development environment;
* LoRaWAN 1.0.2support;
* Ultra low power design, 10uA in deep sleep;
* 1.27 stamp edge design for SMT;
* Good impendence matching and long communication
Product introduction
What’s this?
HT-CT62 is a LoRa/LoRaWAN node module characterized by its extensive communication range, minimal power consumption, heightened sensitivity, and cost-effectiveness.
Main Features
HT-CT62 is a LoRa/LoRaWAN node module featuring extended communication range, low power consumption, high sensitivity, and cost-effectiveness. The module comprises the ESP32-C3FN4 (a 32-bit microprocessor based on RISC-V architecture) and Semtech LoRa Transceivers (SX1262). It integrates 2.4 GHz Wi-Fi and LoRa dual-mode wireless communication. HT-CT62, packaged in a compact form with stamp holes, is an optimal choice for applications in smart cities, smart farms, smart homes, and IoT development.
Specification
- Tab1
|
Parameters
|
Description
|
|
Master Chip
|
ESP32-C3FN4(32-bit@RISC-V architecture)
|
|
WiFi
|
802.11 b/g/n, up to 150Mbps
|
|
LoRa Chipset
|
Chipset SX1262
|
|
Frequency
|
470~510MHz,
|
|
863~928MHz
|
|
|
Max. TX Power
|
21±1dBm
|
|
Max. Receiving Sensitivity
|
-134dBm
|
|
Hardware Resource
|
5*ADC1+1*ADC2;
|
|
2*UART;
|
|
|
1*I2C;
|
|
|
3*SPI;
|
|
|
15*GPIO; etc.
|
|
|
Memory
|
384KB ROM;
|
|
400KB SRAM;
|
|
|
8KB RTC SRAM;
|
|
|
4MB SiP Flash
|
|
|
Interface
|
2.4G ANT (IPEX1.0);
|
|
LoRa ANT(IPEX1.0);
|
|
|
2*11*1.27 spacing Stamp hol
|
|
|
Power Consumption
|
Deep Sleep 10uA
|
|
Operating Temperature
|
-40~85 ℃
|
|
Dimensions
|
17.78 * 17.78* 2.8mm
|
Arduino-Compatible
We have done a lot of migration and development, made it perfectly support Arduino®, can run the LoRaWAN protocol stably.
Picture display
Main Catagory
Contact us to meet your needs.
Send Your Inquiry Today