Mesh Node T096
Mesh Node T096 Ultra Low Power Dev Board NRF52840 BLE GPS GNSS LoRa Node Compatible Meshtastic MeshCore LoRaWAN 28dBm IoT Module
Product introduction
What’s this?
Mesh Node T096 is an ultra-low-power development board integrating BLE wireless, 28dBm LoRa communication module and GNSS positioning unit.
Mesh Node T096 is a low-power development board that integrates BLE wireless, LoRa, and GNSS. At its core, the nRF52840 MCU provides ample processing power and BLE wireless connectivity, while the SX1262 LoRa transceiver—integrated with PA—delivers transmit power of 28dBm, ensuring exceptional range and link reliability. The UC6580 GNSS chip enables precise global positioning, making the device ideal for decentralized mesh networks, asset tracking, and remote sensing.
Fully supported by the Arduino development environment and compatible with open-source mesh projects such as Meshtastic and MeshCore, the Mesh Node T096 offers developers and enthusiasts a versatile, ready-to-use platform for building resilient, scalable mesh networks.
Utilizing Laser Direct Structuring (LDS) technology for both GNSS and BLE wireless antennas, the T096 achieves a compact, durable, and highly efficient antenna solution. Engineered for low-power operation, it is perfectly suited for battery-powered deployments.
Fully supported by the Arduino development environment and compatible with open-source mesh projects such as Meshtastic and MeshCore, the Mesh Node T096 offers developers and enthusiasts a versatile, ready-to-use platform for building resilient, scalable mesh networks.
Main Features
♢Supports BLE wireless, LoRa, and GNSS communication.
♢Ultra-low power consumption.
♢Peak output power of 28dBm, and the LNA can be bypassed.
♢Supports GPS, GLONASS, BDS (BeiDou), Galileo, NAVIC, and QZSS.
♢Integrated lithium battery management system (charge/discharge management, overcharge protection, battery power detection,automatic switching between USB and battery power).
♢USB-C interface with comprehensive voltage regulation, ESD protection, short circuit protection, and RF shielding.
♢Supports the Arduino development framework, providing LoRa/LoRaWAN examples.
♢Compatible with Meshtastic and MeshCore.
♢Ultra-low power consumption.
♢Peak output power of 28dBm, and the LNA can be bypassed.
♢Supports GPS, GLONASS, BDS (BeiDou), Galileo, NAVIC, and QZSS.
♢Integrated lithium battery management system (charge/discharge management, overcharge protection, battery power detection,automatic switching between USB and battery power).
♢USB-C interface with comprehensive voltage regulation, ESD protection, short circuit protection, and RF shielding.
♢Supports the Arduino development framework, providing LoRa/LoRaWAN examples.
♢Compatible with Meshtastic and MeshCore.
Layout
Pin Map
Dimensions
GNSS ANT IPEX
The development board is connected to the LDS antenna by default. If you need to use the coaxial antenna interface to connect an external GNSS antenna, as shown in the figure below, move the resistor in the red box ① half a grid to the position of the green box②.
Specification
- Tab1
|
Parameters
|
Description
|
|
MCU
|
SX1262
|
|
LoRa Chip
|
LoRa Chip
|
|
GNSS Chip
|
UC6580(L1+L5)
|
|
Frequency
|
863~928MHz
|
|
Max. TX Power
|
28±1dBm
|
|
Hardware Resource
|
USB 2.0, 2 x LEDs, 2 x Buttons, 4 x SPI, 2 x TWI, 2 x UART, 4 x PWM, QSPI, I2S, PDM, QDEC Etc.
|
|
Interface
|
Type-C USB, 1.25-2P lithium battery connector, 1.25-2P solar panel connector, LoRa ANT (IPEX1.0), GNSS ANT (IPEX1.0), 2 x 13 x
2.54 Header Pin |
|
Power Supply
|
USB-C 5V
Lithium battery 3.7V( 3.3-4.2V ) |
|
Operating Temperature
|
-20 ~ 70 ℃
|
|
Dimensions
|
52.00*25.40*10.26 mm
|
Picture display
Main Catagory
Contact us to meet your needs.
Send Your Inquiry Today