WiFi LoRa 32(V4)
WiFi LoRa 32(V4), ESP32S3 + SX1262 LoRa Node, Meshtastic and LoRaWAN Compatible Supports WiFi, BLE, and LoRa Communication
*2MB PSRAM and 16MB external Flash, more suitable for UI and complex system.
*LoRa Transmit Power: High-power version 28 dBm, Low-power version 22 dBm
*PC casing protects the screen and integrates FPC 2.4G antenna.
*Form factor and pin compatibility with WiFi LoRa 32 V3.
*PC casing protects the screen and integrates FPC 2.4G antenna.
*Added SH1.25-2Pin solar panel interface, and SH1.25-8Pin GNSS interface.
*Optimized lithium battery management.
*Low power consumption is less than 20μA.
Product introduction
High Light
More Powerful MCU
The ESP32-S3R2 offers 2MB of PSRAM and is equipped with an external 16MB Flash, making the upgraded memory configuration more suitable for Ul and complex system design.
Higher Transmission Power
The device is available in high-power and low-power versions. The high-power version offers a transmit power of up to 27±1dBm, enabling longer communication distances and adaptability to a wider range of application scenarios..
More Peripheral Interfaces
•Added SH1.25*2 solar panel interface, supports 4.7~6V solar input.
•Added SH1.25*8Pin GNSS interface, GNSS power can be individually controlled.
•SH1.25*2 lithium battery interface
Compatible with V3 Pinout
Almost entirely retains the form factor and pin layout of V3, while adding additional pins. The pin plating process has been upgraded from silver plating to gold plating.
Specification
- Tab1
|
Parameters
|
V3
|
V4
|
|
MCU
|
ESP32-S3FN8
|
ESP32-S3R2
|
|
Flash
|
8MB (integrated)
|
16MB (external)
|
|
USB to Serial Chip
|
CP2102
|
Removed CP2102
|
|
Power Management
|
Standard Li-ion management IC
|
Upgraded IC supporting solar input
|
|
Solar Input
|
Not available
|
Added SH1.25-2P interface
|
|
LoRa TX Power
|
21卤1dBm
|
28卤1dBm
|
|
2.4G Antenna
|
Metal spring antenna
|
FPC antenna + IPEX connector
|
|
GPS Interface
|
Not available
|
Added SH1.25-8Pin interface
|
|
Peripheral I/F
|
36-pin
|
40-pin
|
|
Screen Connection
|
Soldered
|
Soldered + B2B connector
|
|
Pin Craft
|
Silver-plated
|
Gold-plated
|
|
Screen Bracket
|
Partial protection
|
Full protection
|
|
Parameters
|
Description
|
|
MCU
|
ESP32-S3R2 (Xtensa®32-bit lx7 dual core processor)
|
|
LoRa Chip
|
SX1262
|
|
Frequency
|
High-power version: 863-928MHz
|
|
Low-power version: 433, 470-510, 863-928MHz
|
|
|
Max. TX Power
|
High-power version: 28 ±1 dBm
|
|
Low-power version: 21 ±1 dBm
|
|
|
Max. Receiving sensitivity
|
-137dBm@SF12 BW=125KHz
|
|
Wi-Fi
|
802.11 b/g/n, up to 150Mbps
|
|
Bluetooth
|
Bluetooth (LE), Bluetooth 5, Bluetooth Mesh
|
|
Hardware Resource
|
7*ADC1 + 2*ADC2;
|
|
7*Touch;
|
|
|
3*UART;
|
|
|
2*I2C;
|
|
|
2*SPI; etc.
|
|
|
Memory
|
384KB ROM; 512KB SRAM; 16KB RTC SRAM; 2MB PSRAM; 16MB Flash
|
|
Interface
|
Type-C USB;
|
|
SH1.25*2 Pin lithium battery interface;
|
|
|
SH1.25*8 Pin interface;
|
|
|
LoRa ANT(IPEX1.0);
|
|
|
2.4G ANT(IPEX1.0)
|
|
|
Battery applicable
|
3.3-4.4V lithium battery
|
|
Operating Temperature
|
-20 ~ 70 ℃
|
|
Dimensions
|
51.7 * 25.4* 10.7mm
|
Picture display
Main Catagory
